 |
The D-Link DGS-3130-54PS is a Lite Layer 3
stackable managed switch designed for enterprise and metro Ethernet access
networks. It features 48 Gigabit PoE+ ports, 2 10GBASE-T ports,
and 4 10G SFP+ ports.
Ports and Connectivity
- Total
Ports: 54
- 1GbE
PoE+ Ports: 48 x 10/100/1000BASE-T PoE+ ports
- 10GbE
Copper Uplink Ports: 2 x 10GBASE-T ports
- 10GbE
Fiber Uplink Ports: 4 x 10G SFP+ ports
- Console
Port: 1 x RJ-45 for out-of-band CLI management
- USB
Port: 1 x USB 2.0 Type A port
- Media
Types Supported: Optical Fiber, Twisted Pair
Performance
- Switching
Capacity: 216 Gbps
- Forwarding
Rate: 161 Mpps (64-byte packet size)
- MAC
Address Table Size: 16K (16,384) entries
- Packet
Buffer Memory: 4 MB
- Jumbo
Frame Support: Up to 9 KB
Power over Ethernet (PoE)
- PoE
Standards: IEEE 802.3af, IEEE 802.3at (PoE+)
- PoE
Power Budget: 370 W (default), expandable to 740 W with optional
DPS-700 Redundant Power Supply (RPS)
- Power
per Port: Up to 30 W on ports 1-48
Physical and Environmental
- Form
Factor: 1U Rackmount
- Dimensions
(W x D x H): 17.32" x 13.78" x 1.73" (440 x 350 x 44
mm)
- Weight:
~11.6 lbs (5.26 kg)
- Redundant
Power Supply (RPS) Support: Yes (DPS-700)
- Surge
Protection: 6 kV on all copper ports
- Fans:
4 smart fans
- Power
Input: AC 100 to 240 V, 50 to 60 Hz
Stacking and Management
- Stacking
Type: Physical and Virtual
- Physical
Stacking Units: Up to 9 units per stack
- Physical
Stacking Bandwidth: 80 Gbps (bidirectional)
- Virtual
Stacking Units: Up to 32 devices
- Management
Interfaces: CLI (Command-Line Interface), Web-based GUI, SNMP
Layer 2 and Layer 3 Features
- Layer
Supported: Layer 2+ and Layer 3 Lite
- VLAN
Support: Max 4K VLAN groups, Port-based, Protocol-based, MAC-based,
Voice VLAN, ISM VLAN, Q-in-Q
- Routing
Protocols: Static Routing, RIP/RIPng, IGMP, MLD, VRRP
- Security:
Access Control Lists (ACLs), 802.1X authentication, IP-MAC-Port Binding
(IMPB), DHCP Snooping
- Quality
of Service (QoS): 8 queues per port, CoS, DSCP, bandwidth control,
traffic shaping
- Reliability:
Ethernet Ring Protection Switching (ERPS) with 50 ms recovery time,
Spanning Tree Protocols (STP, RSTP, MSTP)
Compatible Transceivers
The D-Link DGS-3130-54PS switch is compatible with SFP and SFP+ transceivers.
|
|
|
