Emulex LPe111 4Gb PCIe 2.0 Single-port Fibre Channel Host Bus Adapter, LPe111-E

Standards

• ANSI Fibre Channel - FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4, FC-FLA, FC-PLDA, FC-TAPE, FCP-2
• Fibre Channel class 2 and 3
• PHP hot plug - hot swap
• PCI Express base spec 1.0a
• PCI Express card electromechanical spec 1.0a

Architecture

• Single-channel
• 4Gb/s, 2Gb/s or 1Gb/s FC Link speeds automatically detected
• Up to 16 total port logins available

Comprehensive OS Support

• Windows, Linux

Hardware Environments

• x86 and x64 processor families

Optical

• Data rates: 1.0625, 2.125 and 4.25Gb/s (auto-detected)
• Optics: Short wave lasers with LC type connector
• Cable: 50/125 microns, up to 150 meters at 4Gb/s 62.5/125 microns, up to 70 meters at 4Gb/s

Physical Dimensions

• Short, low profile MD2 form factor card
• 167.64mm x 64.42mm (6.60” x 2.54”)
• Standard bracket (low profile available)

Power & Environmental Requirements

• Volts: +3.3
• Operating temperature: 0° to 55°C (32° to 131°F)
• Airflow required: Natural Convection
• Storage temperature: -40° to 70°C (-40° to 158°F)
• Relative humidity: 5% to 95% non-condensing

Agency Approvals

• Class 1 Laser Product per DHHS 21CFR (J) and EN60825
• UL recognized to UL 60950-1
• CUR recognized to CSA22.2, No. 60950-1-03
• TUV certified to EN60950
• FCC rules, Part 15, Class B
• ICES-003, Class B
• EMC Directive 2004/108/EEC (CE Mark)
• EN55022, Class B
• EN55024
• Australian EMC Framework (C–Tick Mark) AS/NZS CISPR22, Class B
• VCCI, Class B
• MIC (Korea), Class B
• BSMI (Taiwan), Class B